All these adapters are allow the prop to easily dislodge in an accident. They are held in place by O-Rings. These are not reccomended for high RPM applications. Essentially, if the expected top speed is over 40mph, you should consider using a Collet or Set Screw type adapter. Use your own judgement and good reason here. The best way to save props is to understand they make very poor landing gear. ;-)
GWS Prop Saver Adapter. Four different applications-any GWS motor or geared drive shafts. Will fit shafts from 2mm to 4.0mm. One of each size. Hub held to threaded shafts with nuts, prop held to hub with rubber bands which allow prop to fly off upon contact with ground. Easy to reinstall often undamaged prop with rubber bands.
Special notes from Dave: You will probably put install these right at the base of the threads then cut the shaft. Although not a requirment,you'll probably want to shorten shaft with Dremel cut off wheel (USE SAFETY GLASSES!!!) so a short stub reaches into but not through prop for centerting yet allowing the prop to flip off at impact. Hubs have molded centerting boss presumably to match up nicely to most GWS brand props. Use your own judgement and set up to suit your use.
This unit has a blind hole for the motor shaft. The front of the adapter becomes the front of the shaft. A 1.4mm nub centers your prop. Made for props designed to press onto 1.5mm shafts. Perfect to get your GWS 3-2 or 3-3 prop mounted with a saver on your brushless motor. We suggest our small o-rings above for use with this saver. The included rubber bands are of poor quality and should be discarded.
SKU Number: RRCPS15NUB
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
Print and complete this form for all Orbit Charger repair orders to be included with all repair requests.
Pictured to left is one of Garrett's competition ships, to right .... Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison