The Magnattila was one of the first of the Flair Scouts to be designed and has stood the test of time superbly. Fit it with a Williams Bros. Spandau machine gun, lurk around up sun, and just wait for an unsuspecting Puppeteer. It makes an ideal first aileron model and has the added advantage of style. The kit is supplied in the standard land based version but like the Puppeteer vintage floats can be fitted thus providing a perfect introduction to float plane flying. Many a Magnattila has been used successfully as a first aileron model. Specification: Span: 60" (1525 mm) Engines: .30-.40 2 strokes; .40-.60 4 strokes Radio: 3/4 channel Weight: 5.5 lbs (2.5kg)
Kit Contents: Strip and sheet wood Aluminium cowl Pre-cut parts Fuel tank Engine mounting Hardware pack Fully detailed plans and instructions Centre of Gravity position - on the main spar.
Additional Items to consider: Pilot "Albert" FL2058 Palmer cord wheels FL2053 Float set FL2051 Machine gun: 1 off 1/4 scale Spandau W30751 Decal sheet FL2042 Dummy engine: 3 off 1/6th scale Le Rhone cylinders W30208
Out of production and only 1 left in stock as of 3/7/17, order today!
Some vintage models are ugly, (not to put too fine a point on it), but take a look at the Black Magic, the design is superb. The engine installation, the tailplane mounted part way up the fin, the faired undercarriage legs, all add up to sheer elegance. Fred Hempsall got it right way back in 1946 but the construction techniques exclude beginners. Specification. Type: Vintage high wing sport model Span 60" Engine .19 - .25 2 strokes .30 4 strokes Radio 2/3 channel Weight 4 lbs. It should be remembered that true vintage models were designed before it became normal for plans and instructions to be minutely detailed. As a consequence it will be necessary for the builder to interpret 3 view drawings and to some extend decide on the order of construction for this model. Kit Contents:Strip and sheet wood, pre-cut parts, engine mount, hardware pack, plan.
Sorry, no longer in production as of SEP 2015 ~ only 2 kits left in stock as of 3/7/17!
Representing the French, the Legionaire is a sport scale version of the Nieuport 17. Most allied air forces flew this impressive machine, more properly called a sesquiplane because of its 1 and 1/2 wings.
Just like the real thing with its high undercarriage this model requires accurate rudder control on take off but once in the air is a real smoothly and is instantly forgiven.
Specifications: Type: Sport scale sesquiplane Span: 52" (1320 mm) Engines: .25-.40 2 strokes, .35-.50 4 strokes Radio: 4 channel Weight: 6 lbs Centre of Gravity Position: 1 1/8" in front of rear cabane strut
Kit Contents: Strip and sheet wood, Aluminium cowl, Pre cut parts, Fuel tank, Engine mounting, Hardware pack, Plans and instructions. Out of production and only 2 left in stock as of 3/7/17, order today!
This large version of the DR1 looks closer to scale than it really is and can be finished to a very impressive standard if required. The original had no rigging wires so these need not bother those wanting authenticity. It is not a beginners model but anyone with reasonable experience will find its flight characteristics smooth and pleasurable. Construction is traditional and straightforward, only the timber is bigger.
Type: Sport scale triplane Span: 73" (1855mm) Engines: .90 min. 2 strokes, .90-1.20 4 stroke Radio: 4 channel Weight: 11 - 14 lbs Center of Gravity Position: On the main spar of the middle wing.
Rating: Build Time-Average to Lengthy, Build Skill- Average Flying Skill:Competent, Instructions:Average
Kit Contents: Strip and sheet wood, Aluminium cowl, Pre cut parts, Hardware pack, Plans and instructions. Out of production and only 1 left in stock as of 9/25/15! Order today!
The Flair Cub is a sport scale version of the famous Piper Cub with build up wings. It has been designed to be perfect for the newcomer to powered aero modelling and it is widely agreed that this is one of the best models for learning to fly R/C model aircraft. Thousands have been built and flown very successfully. The model is available in various configurations; foam wings/ built up. Finishing a model is a personal choice but you can see from the photos that both military and civil are attractive. The Cub can also be flown off floats adding to its appeal.
Sorry, no longer in production. Only 1 left in stock as of 3/7/17, order today!
Kit Contains: Sheet and strip wood; Die cut parts; Engine mount; Cowl; Fuel tank; Hardware pack; Wheels; and highly detailed plans and instructions.
Also available: Complete 4 channel kit with foam wings FL1036 4 channel foam wing kit FL1037
Out of production and only 1 left in stock, order today!
SKU Number: FL1005
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
Print and complete this form for all Orbit Charger repair orders to be included with all repair requests.
Pictured to left is one of Garrett's competition ships, to right .... Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison